PE4710 pipe fittings
June 23, 2025
Technological breakthrough of PE4710 material PE4710 represents a major advancement in polyethylene material technology. Its name is derived from the
Technological breakthrough of PE4710 material PE4710 represents a major advancement in polyethylene material technology. Its name is derived from the
PE100 Material Introduction PE100 (Polyethylene 100 Grade) is a third generation high-density polyethylene (HDPE) material with excellent mechanical properties and
Overview of large diameter HDPE fittings Large diameter HDPE fittings refer to pipe connection parts with a nominal diameter (DN)
As the core component of modern engineering pipeline system, HDPE sdr 11 fittings have excellent performance due to the unique
Core features of HDPE drainage fittings Material advantages Density 0.95-0.97g/cm³, molecular weight > 250,000 Acid and alkali resistance range pH2-12
HDPE butt fusion fittings are key connection components in plastic pipe systems and are widely used in water supply, gas,
Technological breakthrough of PE4710 material PE4710 represents a major advancement in polyethylene material technology. Its name is derived from the ASTM D3350 standard classification: “PE”: High-density polyethylene (HDPE) material “47”: Minimum hydrostatic strength of 4700psi (about 32.4MPa) “10”: Material grade code, indicating the best long-term performance Compared with traditional PE3408
PE100 Material Introduction PE100 (Polyethylene 100 Grade) is a third generation high-density polyethylene (HDPE) material with excellent mechanical properties and chemical corrosion resistance. Its name is derived from the international standard ISO 12162, which means that the minimum required strength (MRS) reaches 10MPa (100bar) and can withstand long-term hydrostatic pressure.
Overview of large diameter HDPE fittings Large diameter HDPE fittings refer to pipe connection parts with a nominal diameter (DN) of 300mm and above. As a key component of modern pipeline systems, they have been widely used in municipal engineering, water conservancy construction, industrial transportation and other fields. With the
As the core component of modern engineering pipeline system, HDPE sdr 11 fittings have excellent performance due to the unique molecular structure design. Made of PE100 grade high-density polyethylene raw material and produced through advanced catalytic polymerization process, they have highly linear molecular chains and appropriate branching degree, and the
Core features of HDPE drainage fittings Material advantages Density 0.95-0.97g/cm³, molecular weight > 250,000 Acid and alkali resistance range pH2-12 (ASTM D543 standard test) Working temperature -40℃ to 80℃ (short-term peak 100℃) Mechanical properties Property Test Standard Typical Value Tensile Strength ISO 527 ≥22 MPa Impact Strength ISO 179 No
HDPE butt fusion fittings are key connection components in plastic pipe systems and are widely used in water supply, gas, chemical industry, mining and other fields. It uses hot-melt butt technology to form a high-strength, leak-free permanent connection with excellent corrosion resistance, flexibility and long life. This article will explore
Copyright © Puhui All Rights Reserved
